top of page

AquaHeat Heat Pump Calculator

Check the default settings and change if required.

Enter the pool length and depth or the pool area or the volume

If value is not available contact your AQUAHEAT agent.

Calculate
Reset

kW

kW: 0

Default Settings

Average Depth:                  m

SHALLOW SIDE + DEEP SIDE ADDED TOGETHER, DIVIDED BY TWO
arrow&v

Required Temp Increase:    C

BY HOW MANY DEGREES CELSIUS DO YOU WANT TO RAISE THE POOL WATER ABOVE UNHEATED WATER TEMPERATURE
arrow&v

Initial Heating Time:     Hour

HEATING PERIOD FROM SWITCHING THE HEAT PUMP ON TO THE TIME IT SHOULD ACHIEVE THE SET TEMPERATURE. OUR RECOMMENDATION IS TO ALWAYS USE 84 HOURS. A SHORTER PERIOD REQUIRES A MUCH BIGGER HEAT PUMP. *** WITHOUT THE USE OF A HEAT RETAINING BLANKET, YOU CANNOT EXCEED 60 HOURS DUE TO EXTREME HEAT LOSS.
arrow&v

Heat Retaining Blanket: Y/N

WITHOUT THE USE OF A HEAT RETAINING BLANKET, YOU CAN ONLY RAISE YOUR WATER TEMPERATURE BY 9 - 10 DEGREES CELSIUS, SUBJECT TO GOOD WEATHER CONDITIONS. WITH THE USE OF A HEAT RETAINING BLANKET, YOU CAN RAISE YOUR WATER TEMPERATURE BY 15 DEGREES CELSIUS. THE AQUAHEAT RD SERIES HEAT RETAINING BLANKETS ARE NOT SAFETY BLANKETS AND ARE NOT WIND RESISTANT. THE BLANKETS ONLY PREVENT HEAT LOSS.
arrow&v

Length:    m

​

And

LONGEST SIDE OF THE SWIMMING POOL

Width:     m

​

Or

SHORTER SIDE OF THE SWIMMING POOL

Area:     m2

​

Or

LENGTH X THE WIDTH OF THE SWIMMING POOL

Volume: m3

LENGTH X THE WIDTH OF THE SWIMMING POOL
bottom of page